PMI推出系列新产品

2019-05-06

1.0 PMI Model No. PE210R258R515SFFLM Rev. B, 0.25 to 8.5 GHz Low Noise Amplifier

PMI Model No. PE210R258R515SFFLM Rev. B is a low noise amplifier that operates over the frequency range of 0.25 to 8.5 GHz. It has a small signal gain window of +9.0 to +13.0 dB and a maximum noise figure of 4.5 dB. This unit has a minimum OP1dB of +16 dB and a maximum VSWR of 2.3:1. This model is supplied with SMA female connectors in our standard PE2 housing.

  • Frequency Range: 0.25 to 8.5 GHz
  • Small Signal Gain Window: +9.0 to +13.0 dB - Measured 12.41 dB Max., 11.13 dB Min.
  • Gain Flatness: ≤1.5 dB P-P Goal, ≤2.0 dB P-P Max. - Measured 0.64 dB
  • Noise Figure: 4.5 dB Max. (Valid from 0.5 to 8.5 GHz) - Measured 4.48 dB @ 500 MHz
  • OP1dB: +16 dB Min. - Measured >16 dBm
  • Max Input Power: +10 dB CW - Measured +10 dBm CW
  • VSWR In/Out: 2.3:1 Max. - Measured 1.73:1/1.85:1
  • DC Voltage Supply: +12 VDC
  • DC Current Draw: 300 mA Max. - Measured 125 mA


2.0  PMI Model No. PE2-15-1R018R0-4R5-22-12-SFF, 1.0 to 18.0 GHz Low Noise Amplifier

 

PMI Model No. PE2-15-1R018R0-4R5-22-12-SFF is low noise amplifier that operates over the frequency range of 1.0 to 18.0 GHz. It provides a typical gain of 15 dB and a typical noise figure of 4.5 dB. This unit has a typical OP1dB of +20 dB and a typical VSWR of 2.0:1. This model is supplied with SMA female connectors in our standard PE2 housing.

  • Frequency Range: 1.0 to 18.0 GHz
  • Gain: 15 dB Typ. - Measured 14.49 dB Min., 16.82 dB Max.
  • Gain Flatness: ±1.5 dB Max. - Measured ±1.16 dB
  • Noise Figure: 4.5 dB Typ. - Measured 4.27 dB @ 1.0 GHz
  • OP1dB: +20 dBm Typ. - Measured >20 dBm
  • VSWR In/Out: 2.0:1 Typ. - Measured 1.35:1/1.90:1
  • DC Voltage Supply: +12 to +15 V
  • DC Current Draw: 225 mA Max. - Measured 215 mA

 

3.0 PMI Model No. PDVAN-8018-60-8-OPT25DBM, 8.0 to 18.0 GHz 8-Bit Digitally Programmable Attenuator

 

PMI Model No. PDVAN-8018-60-8-OPT25DBM is an 8-Bit digitally programmable attenuator that operates over the frequency range of 8.0 to 18.0GHz.  This model offers low loss of 3.6 dB typically and an attenuation range of 60 dB.  This model was designed to handle input power levels up to +25 dBm CW under operating conditions and signal levels up to +30 dBm CW without damage.  The attenuation flatness over frequency is less than ±1.6 dB at full attenuation.  The switching speed is less than 800 ns.  This model is supplied with SMA female connectors in a housing that measured 2.0" x 1.8" x 0.5".

 

  • Frequency Range: 8.0 to 18.0 GHz
  • Mean Attenuation Range: 60 dB
  • LSB: 0.25 dB
  • Insertion Loss: 4.0 dB Goal, 5.0 dB Max. - Measured 3.63 dB
  • VSWR: 2.0:1 Max. - Measured 1.86:1
  • Survival Power Rating: +30 dBm CW Max.
  • Operating Input Power: +25 dBm CW Min.
  • Attenuation Flatness:
    • ±0.80 dB @ 10 dB Attenuation - Measured ±0.75 dB
    • ±1.10 dB @ 20 dB Attenuation - Measured ±0.98 dB
    • ±1.15 dB @ 40 dB Attenuation - Measured ±0.76 dB
    • ±1.60 dB @ 60 dB Attenuation - Measured ±1.59 dB
  • Switching Speed: 800 ns Max. - Measured <800 ns
  • Digital Control: 8-Bit Binary TTL
  • Input Tracking: Monotonic
  • DC Voltage:
    • +12 to +15 V @ 150 mA Max. - Measured 35 mA
    • -12 to -15 V @ 75 mA Max. - Measured 0 mA

 

PMI Website Link,

 

4.0 PMI Model No. EQL-17D6G21D6G-8DB-292MF, 17.6 to 21.6 GHz Passive Amplitude Equalizer

 

PMI Model No. EQL-17D6G21D6G-8DB-292MF is a passive amplitude equalizer that operates over the frequency range of 17.6 to 21.6 GHz. This unit has a maximum input power of 0.5 Watts CW and a maximum VSWR of 2.0:1. This model is supplied with a 2.92 mm male connector and a 2.92 mm female connector in a housing measuring 1.10" x 0.67" x 0.22".

  • Frequency Range: 17.6 to 21.6 GHz
  • Maximum Input Power: 0.5 W CW
  • VSWR: 2.0:1 Max. - Measured 1.94:1
  • Amplitude @ 17.6 GHz: -1 dB Min. - Measured -2.86 dB
  • Slope:
    • Amplitude @ 17.6 GHz
    • Amplitude -8 dB @ 21.6 GHz
    • Amplitude = -2 dB/GHz
    • (Frequency above 17.6 GHz In GHz) + (Amplitude @ 17.6 GHz) - Measured -2.15 dB/GZ
  • Linearity: ±0.5 dB

 

5.0 PMI Model No. 6CL9227D5M-180-CD-SFF, 9227.5 MHz Combline Filter

      

PMI Model No. 6CL9227D5M-180-CD-SFF is a combline filter centered at 9227.5 MHz with a bandwidth of 180 MHz. This unit has a typical insertion loss at the center frequency of 1.0 dB and a maximum passband VSWR of 1.5:1. This model is supplied with SMA female connectors in a housing measuring 1.90" x 0.40" x 0.40".

  • Center Frequency: 9227.5 MHz Nominal
  • 3 dB Bandwidth: 180 MHz Typ.
  • VSWR in the Pass Band: 1.5:1 Max. - Measured 1.22:1
  • Insertion Loss (Fo): 1 dB Typ.
  • Phase Linearity (9207.5 to 9247.5 MHz): ±3.2° Typ. - Measured ±0.25°
  • Rejection -60 dB Nominal: 8823.5 MHz
  • Rejection -60 dB Nominal: 9671.5 MHz
  • Impedance (Source Load): 50 Ohms Nominal

 

6.0 PMI Model No. LM-0518-10-1W-SHS-2-M-1218, 12.0 to 18.0 GHz High Power Limiter


PMI Model No. LM-0518-10-1W-SHS-2-M-1218 is a high power limiter that operates from 12.0 to 18.0 GHz. This limiter handles 100 Watts Peak Power with a pulse width of 1 usec. The typical insertion loss is only 1.5 dB and it has a maximum VSWR of 2.0:1. This model is supplied with a SMA male connector and a SMA female connector in a housing measuring 1.0" x 1.0" x 0.4".

  • Frequency Range: 12.0 to 18.0 GHz
  • Insertion Loss @ -20 dBm Input: 2.0 dB Max., 1.5 dB Typ. -Measured 1.64 dB
  • Input VSWR @ -20 dBm Input: 2.0:1 Max., 1.5:1 Typ. - Measured 1.3:1
  • Leakage @ 1 Watt CW Input: +14 dBm Max., +10 dBm Typ. - Measured <10 dBm
  • Peak Power: 100 W
  • Pulse Width: 1 usec
  • Duty Cycle: 0.1%

PMI Website Link, 

https://www.pmi-rf.com/products-details/lm-0518-10-1w-shs-2-m-1218-

 

7.0  PMI Model No. PS-1G4G-180-A-SFF, 1.0 to 4.0 GHz Analog Phase Shifter

PMI Model No. PS-1G4G-180-A-SFF is an analog phase shifter that operates from 1.0 to 4.0 GHz. This unit has a typical insertion loss of 5.0 dB and a typical VSWR of 2.0:1. This model is supplied with SMA female connectors in a housing measuring 5.0" x 3.0" x 0.9".

  • Frequency Range: 1.0 to 4.0 GHz
  • RF Impedance: 50 Ohms
  • Phase Shift Range: 0 to 180 Degrees
  • Insertion Loss: 5.0 dB Typ.
  • VSWR: 2.0:1 Typ. - Measured 2.0:1 Typ.
  • Voltage Control Range: +11 V / -11 V

PMI Website Link,

 

8.0 PMI Model No. P2T-100M6G-80-T-SFF-JW, 0.1 to 6.0 GHz SP2T Absorptive Switch

 

PMI Model No. P2T-100M6G-80-T-SFF-JW is a single pole, two throw, absorptive switch designed to operate between 0.1 to 6.0 GHz. This switch offers a typical insertion loss of 2.5 dB and provides a typical isolation of 80 dB. The typical switching speed is 150 ns and the maximum VSWR is 2.0:1. This model is supplied with SMA female connectors in a housing that measures 1.0" x 1.0" x 5.0".

  • Frequency Range: 0.1 to 6.0 GHz
  • Insertion Loss: 2.5 dB Typ., 2.75 dB Max. - Measured 1.92 dB
  • Operating Input Power: +23 dBm CW Max.
  • Survival Input Power: +33 dBm CW Max.
  • VSWR: 2.0:1 Max. - Measured 1.23:1
  • Isolation: 80 dB Typ., 70 dB Min. - Measured 82.04 dB
  • Switching Speed: 150 ns Typ., 200 ns Max. - Measusred 156 ns
  • Control:
    • TTL Logic
    • "0" = Insertion Loss
    • "1" = Isolation
  • DC Voltage:
    • +5 VDC - Measured @ 46 mA
    • -12 VDC - Measured @ 48 mA

 

9.0 PMI Model No. P16T-18G40G-90-T-512-SFF-DEC, 18.0 to 40.0 GHz SP16T Absorptive Switch

 

PMI Model No. P16T-18G40G-90-T-512-SFF-DEC is a single pole, sixteen throw, absorptive switch that operates from 18.0 to 40.0 GHz. This switch offers a typical insertion loss of 12 dB and a provides a minimum isolation of 50 dB. The typical VSWR is 2.5:1 and the input power is +20 dBm CW. This model is supplied with 2.92 mm female connectors in a housing measuring 8.00" x 3.00" x 0.65".

  • Frequency Range: 18.0 to 40.0 GHz
  • Insertion Loss: 12 dB Typ. - Measured 10.38 dB
  • Isolation: 50 dB Min. - Measured 55.13 dB
  • VSWR In/Out: 2.5:1 Typ. - Measured 2.39:1
  • VSWR Ouput/Off: 2.5:1 Typ. - Measured 2.24:1
  • Switching Speed:
    • Rise/Fall: 50 ns Typ. / 10 ns Typ. - Measured 13 ns / 6 ns
    • Delay On/Off: 150 ns Max. - Measured 100.5 ns
  • Input Power: +20 dBm CW
  • Control: 4-Bit Decoded TTL Logic
  • Power Supply:
    • +5 VDC @ 750 mA Max. - Measured 470 mA
    • -12 VDC @ 200 mA Max. - Measured 176 mA

 

10.0 PMI Model No. TDC-30T-0110-CD-1, 0.1 to 10.0 GHz Threshold Detector

 

PMI Model No. TDC-30T-0110-CD-1 is a high speed threshold detector designed to operate from 0.1 to 10.0 GHz. This unit has a VSWR of 2.0:1 and a typical propagation delay of 15 ns. This model is supplied with SMA female connectors in a housing measuring 2.2" x 1.5" x 0.4".

  • Frequency Range: 0.1 to 10.0 GHz
  • Insertion Loss: 2.5 dB Max.
  • VSWR: 2.0:1 - Measured 1.50:1
  • Frequency Flatness: ±1.5 dB Typ., ±2.0 dB Max. - Measured ±0.69 dB
  • Threshold Level: Adjustable
  • Threshold Variation: ±0.5 dB Typ. over any 1 GHz - Measured ±0.60 dB
  • Propagation Delay: 20 ns Max., 15 ns Typ. - Measured 16.36 ns
  • Ouput Pulse Width when Input:
    • -20 to -10 dBm: Within 10 ns of Input Pulse Width
    • -10 to 0 dBm: Within 10 ns of Input Pulse Width
    • -10 to +10 dBm: Within 25 ns of Input Pulse Width
    • -20 to +10 dBm: Within 25 ns of Input Pulse Width
  • DC Power Supply:
    • +12 V @ 150 mA Max. - Measured 111 mA
    • -12 V @ 100 mA Max. - Measured 50 mA

PMI Website Link,

                  

______________________________________________________________________________
______________________________________________________________________________ 

   

 *** For more information on PMI's complete line of products, please visit ***

                   

 
     
 

DC to 50 GHz Components, Modules, and Sub-Systems

 

PMI offers just about any RF/Microwave component, module, or sub-system for both industrial and military based requirements.  Please click on the product types below to be directed to our web site catalog.  Components and modules can be modified to meet your exact requirement.

Loading
OEM & Obsolete Parts Support

 
 

 

收缩
  • QQ咨询

  • 如果客服无反应,请刷新页面后再次选择。
  • 业务咨询