PMI推出系列新产品

2019-07-16


  

1.0 PMI Model No. SDLVA-218-64-70MV-CW-100, 2.0 to 18.0 GHz Successive Detection Log Video Amplifier

PMI Model No. SDLVA-218-64-70MV-CW-100 is a Successive Detection Log Video Amplifier (SDLVA) that operates over the frequency range of 2.0 to 18.0 GHz. It has a log dynamic range of -60 to +4 dBm, a nominal log slope of 70 mV/dB, and a maximum input VSWR of 2.0:1. This unit is outfitted with SMA female connectors in a hermetically sealed housing measuring 3.5" x 2.5" x 0.5".

  • Frequency Range: 2.0 to 18.0 GHz
  • Frequency Flatness: ±2.0 dB Typ. - Measured ±2.2 dB
  • Pulse Width Range: 100 ns to 300 us
  • Pulse Peak Amplitude Loss:
    • -30 dBm or Higher Pulse on CW Level of -50 dBm: No Loss - Measured 1.2 dB
    • -30 dBm or Higher Pulse on CW Level of -40 dBm: 2.0 dB Max. - Measured 1.2 dB
  • TSS from -20°C to +85°C: -66 dBm - Measured -68.1 dBm
  • Log Dynamic Range: -60 to +4 dBm
  • Log Slope: 70 mV/dB Nominal - Measured 68.9 dB
  • Log Accuracy:
    • ±1.5 dB Max. Referred to an Ideal Line Defined By: 70 mV * (Input RF Power) + 4700 mV @ 10.0 GHz and 25°C - Measured +0.77/-0.70 dB
    • ±4.5 dB Max. over Temperature and Frequency - Measured +2.40/-2.81 dB
  • Output Rise Time: 25 ns Max.
  • Fall Time @ -15 dBm: 75 ns Typ.
  • Settling Time: 55 ns Max., 90% Output to ±0.5 dB of Final Value
  • Recovery Time: 500 ns Max.
  • Input VSWR: 2.0:1 Max. - Measured 1.95:1
  • Max Input Level: +20 dBm CW
  • Video Output Offset: 0.0 V Min. - Measured 0.149 V
  • Video Output Load: 100 Ohms
  • Power Supply:
    • +15 VDC @ 400 mA Max. - Measured 370 mA
    • -15 VDC @ 150 mA Max. - Measured 100 mA

 

2.0  PMI Model No. P3T-9R5G10G-55-R-SFF, 9.5 to 10.0 GHz, SP3T Reflective Switch

 

PMI Model No. P3T-9R5G10G-55-R-SFF is a Single Pole, Three Throw, Reflective Switch operating over the frequency range of 9.5 to 10.0 GHz. It has a maximum insertion loss of 1.5 dB and a typical isolation of 55 dB. This model is outfitted with SMA female connectors and a Micro-D 9-pin male connector in a housing that measures 1.50" x 1.25" x 0.75".

  • Frequency Range: 9.5 to 10.0 GHz
  • Insertion Loss: 1.5 dB Max. - Measured 1.34 dB
  • Isolation: 55 dB Typ. - Measured 66.06 dB
  • VSWR: 1.5:1 Typ. - Measured 1.25:1
  • Average Power: 7.5 W
  • Peak Power: 75 W (62 us Max. Pulse Width)
  • Switching Speed: 1.0 us Max. - Measured 65.20 ns On/49.40 ns Off/15.80 Rise/3.5 ns Fall
  • Power Supply:
    • +5 V @ 250 mA - Measured 237 mA
    • -28 V @ 50 mA - Measured 20 mA


3.0  PMI Model No. LM-0518-10-1W-SHS-1-SFM, 0.5 to 18.0 GHz Limiter 

 

PMI Model No. LM-0518-10-1W-SHS-1-SFM is a 0.5 to 18.0 GHz Limiter. It has a maximum insertion loss @ -20 dBm input of 2.0 dB and a speed of 10 ns. This limiter is supplied with SMA male input connector and a SMA female output connector in a housing that measures 0.50" x 0.50" x 0.22".

  • Frequency Range: 0.5 to 18.0 GHz
  • Insertion Loss @ -20 dBm Input: 2.0 dB Max., 1.5 dB Typ. - Measured 1.93 dB
  • VSWR @ -20 dBm Input: 2.0:1 Max., 1.5:1 Typ. - Measured 1.69:1 Input/1.70:1 Output
  • Leakage @ 1 W CW Input: +14 dBm Max., +10 dBm Typ. - Measured +13 dBm
  • Speed: 10 ns - Measured 8.79 ns
  • Input Power: 1 W CW, 100 W Peak, 1 us Pulse, 0.1% Duty Cycle Derated to 20% at 125°C
  • Limiting Threshold: +10 dBm Typ. - Measured +5 dBm Min., +7 dBm Max.

 

4.0 PMI Model No. PLA-14D65G15G35G-20DB-SFF-250W, 14.65 to 15.35 Integrated Limiter and Switch BIT Attenuator

 

PMI Model No. PLA-14D65G15G35G-20DB-SFF-250W is an Integrated Limiter and Switch BITAttenuator operating over the 14.65 to 15.35 frequency range. It has a maximum insertion los of 3.59 dB, an average power of 10 W, and a switching sped of 90 ns. This model is outfitted with SMA female connectors in a housing that measures 0.866" x 0.630" x 0.315".

 

  • Frequency Range: 14.65 to 15.35 GHz
  • Insertion Loss: 3.59 dB Max. - Measured 3.5 dB
  • Peak Power Handling:
    • Low Temp (-55°C): 100 W Max.
    • Room Temp (+25°C): 125 W Max.
    • High Temp (+85°C): 100 W Max.
  • Pulse Width: 40 us Typ.
  • Average Power:
    • Low Temp (-55°C): 10 W Max.
    • Room Temp (+25°C): 12.5 W Max.
    • High Temp (+85°C): 10 W Max.
  • Attenuation:
    • Logic TTL "0" - 0 dB Attenuation
    • Logic TTL "1" - 20 dB Attenuation
  • Attenuation Flatness: ±1 dB Max. - Measured ±0.223 dB
  • Attenuation Accuracy: ±1 dB Max. - Measured ±0.18 dB
  • P1dB Limiting Threshold: +5 dBm Min. - Measured 6.3 dBm
  • Flat Leakage:
    • Low Temp (-55°C): +20 dBm Max. @ 0 dB Attenuation and 100 W Max.
    • Room Temp (+25°C): +20 dBm Max. @ 0 dB Attenuation and 125 W Max.
    • High Temp (+85°C): +20 dBm Max. @ 0 dB Attenuation and 100 W Max.
  • Switching Speed:
    • 90 ns @ 50% TTL to 10% RF Voltage Max. - Measured 20 ns
    • 90 ns @ 50% TTL to 90% RF Voltage Max. - Measured 50 ns
  • Control Logic: TTL Compatible
  • Phase Match: 15° Max. (Unit to Unit) - Measured -2.54/+1.41
  • DC Consumption: 150 mA Max. each for +5 V and -15 V - Measured 32 mA and 26 mA
  • VSWR: 2.0:1 Max. @ -10 dBm Input - Measured 1.942:1

 

PMI Website Link,

 

5.0 PMI Model No. APD-8-10M-12V, 10 MHz, 8-Way Power Divider

 

PMI Model No. APD-8-10M-12V is an 8-Way Power Divider that operates at the frequency range of 10 MHz. It has a maximum VSWR of 2:1 and a maximum input power of +23 dBm. This unit is supplied with SMA female connectors and a 9-pin connector in a housing measuring 4.00" x 2.00" x 0.55".

  • Frequency Range: 10 MHz
  • Insertion Loss: 4 dB, ±1.5 dB Max. - Measured 3.03 dB
  • VSWR: 2:1 Max. - Measured 1.25:1 Input/1.33:1 Output
  • Input Power P1dB: +20 dBm Typ. - Measured 22.9 dBm
  • Input Power: +23 dBm Max. (Survival)
  • Output Port to Port Isolation: 25 dB Typ. - Measured 24.15 dB
  • Power Supply: +12 V @ 750 mA Max.

 

6.0 PMI Model No. P1T-8G40G-65-T-292FF-1NS-LVPECL, 8.0 to 40.0 GHz, SPST Absorptive Switch

      

PMI Model No. P1T-8G40G-65-T-292FF-1NS-LVPECL is a 8.0 to 40.0 GHz, Single Pole, Single Throw, Absorptive Switch. It has a minimum isolation of 55 dB and a maximum insertion loss of 6.8 dB. This switch is outfitted with 2.92 mm female connectors in a housing that measures 1.2" x 1.3" x 0.5".

  • Frequency Range: 8.0 to 40.0 GHz
  • Isolation: 65 dB Typ., 55 dB Min. - Measured 70 dB
  • Insertion Loss: 5.5 dB Typ., 6.8 dB Max. - Measured 5.83 dB
  • VSWR In/Out: 2.0:1 Typ., 2.2:1 Max. - Measured 2.1:1/2.1:1
  • Input Power: +17 dBm CW Max.
  • P1dB: +13 dBm Min. - Measured >+17 dBm
  • Switching Speed: 5 ns Typ., 10 ns Max. - Measured 10 ns
  • Rise/Fall Time: 0.9 ns Typ., 1 ns Max. - Measured <1.0 ns
  • Control Signal: Single Ended LVPECL "1" = On
  • DC Voltage:
    • +8 to +15 V @ 15 mA Typ. - Measured 26 mA
    • -8 to -15 V @ 40 mA Max. - Measured 27 mA

 

7.0 PMI Model No. PE2-15-2R012R0-4R0-22-12-SFF, 2.0 to 12.0 GHz Low Noise Amplifier


PMI Model No. PE2-15-2R012R0-4R0-22-12-SFF is a Low Noise Amplifier operating over the frequency range of 2.0 to 12.0 GHz. It has a typical gain of 15 dB and a typical noise figure of 4.0 dB. This model is supplied with SMA female connectors in a housing measuring 1.08" x 0.71" x 0.29".

  • Frequency Range: 2.0 to 12.0 GHz
  • Gain: 15 dB Typ. - Measured 16.6 dB
  • Gain Flatness: ±1.0 dB Max. - Measured ±0.6 dB
  • Noise Figure: 4.0 dB Typ. - Measured 3.1 dB Max.
  • OP1dB: +22 dBm Min. - Measured +22.7 dBm
  • VSWR (Input/Output): 2.0:1 Max. - Measured 1.2:1/1.4:1
  • DC Voltage Supply: +12 to +15 VDC
  • DC Current Draw: 250 mA Max. - Measured 231 mA

PMI Website Link, 

https://www.pmi-rf.com/product-details/pe2-15-2r012r0-4r0-22-12-sff

 

8.0  PMI Model No. DTA-13G14G-40-8-CD-1-20DBM, 13.0 to 14.0 GHz, 8-Bit Attenuator

PMI Model No. DTA-13G14G-40-8-CD-1-20DBM is an 8-Bit Programmable Attenuator that operates over the frequency range of 13.0 to 14.0 GHz. It has a minimum attenuation range of 40 dB, a maximum insertion loss of 5 dB, and a maximum VSWR of 2.0:1. This unit is outfitted with SMA female connectors and a 15-pin Micro-D female connector in a housing that measures 2.00" x 1.80" x 0.50".

  • Frequency Range: 13.0 to 14.0 GHz
  • Attenuation Range: 40 dB Min.
  • Insertion Loss: 5 dB Max. - Measured 4 dB
  • Step Size: 0.25 dB (LSB) - Measured 0.24 dB
  • Adjustment Step Size Accuracy: ±0.125 dB - Measured ±0.078 dB
  • Phase Variation vs. Attenuator Step Size: 1.5°/dB Typ., 2°/dB Max. 0 to 40 dB Attenuation -Measured 1.3°/dB
  • Input 0.1 dB Compression Point: +20 dBm Min. - Measured >+20 dBm
  • Monotonicity: Guaranteed
  • VSWR: 2.0:1 Max. - Measured 1.6:1
  • Switching Time:
    • On Time: 1.0 us Max. - Measured <0.5 us
    • Off Time: 0.5 us Max. - Measured <0.4 us
  • Logic Input:
    • Logic "0" (Bit Off): -0.3 to +0.8 V
    • Logic "1" (Bit On): +2.0 to +5.0 V
  • DC Power Supply: +12 V @ 150 mA Max. - Measured 149 mA

PMI Website Link,

 

9.0 PMI Model No. PMTO-8R8G9R56G-CD-1, 8.8 to 9.56 GHz Gunn-Effect Oscillator

 

PMI Model No. PMTO-8R8G9R56G-CD-1 is a 8.8 to 9.56 GHz, Temperature Stabilized Output Medium Power X-Band Gunn-Effect Oscillator. It has a maximum temperature coefficient of 15 kHz/°C from 0°C to +50°C and a pulling factor of less than 50 kHz. This model is supplied with SMA female connectors in a housing measuring 3.50" x 3.50" x 3.00".

  • Frequency Range:
    • 8.8 to 9.56 GHz (Tuning)
    • 8.9 to 9.46 GHz (To Meet Specification)
  • Tuning Sensitivity:
    • 65 MHz/360° Rotation Typ. - Measured 82.3093 MHz/360°
    • 80 MHz/360° Rotation Typ. - Measured 91.529 MHz/360°
  • Output Frequency vs. Tuner Rotation (Deviation from a Straight Line):
    • ±10 MHz, 8.90 to 8.93 GHz - Measured +2.7 MHz
    • ±5 MHz, 8.93 to 9.43 GHz - Measured -9.9 MHz
    • ±10 MHz, 9.43 to 9.46 GHz - Measured +11.1 MHz
  • Power Output (Any Frequency):
    • J1: +10 (+3, -0) dBm - Measured 10.27 to 10.93 dBm
    • J2: 0 (+3, -0) dBm - Measured 1.4 to 2.73 dBm
  • Tuning Element:
    • Starting Torque: 25 Inch-Oz Max.
    • Withstanding Torque: 100 Inch-Oz Min. @ Stops
  • Spurious Harmonic Signals:
    • 60 dBc Min. (In Band) - Measured >67.36 dBc
    • 45 dBc Min. (Out of Band) - Measured >57.20 dBc
    • 30 dBc Min. (Harmonics) - Measured >46.53 dBc
  • Temperature Coefficient: 15 kHz/°C Max. from 0°C to +40°C - Measured 1 kHz/°C from 0°C to 40°C, 1500 kHz/°C from 40°C to 50°C
  • Long Term Frequency Drift: 50 kHz/hr Max. @ Any Constant Temp from 0°C to +50°C
  • Pulling Factor: Less than 50 kHz
  • REG/OSC Power Supply: +24 ± 1 VDC @ 1.5 A Max., 2% Regulation, Ripple = 2 mVrms -Measured +24 ± 1 @ 0.172 A
  • Heater Power Supply (Isolated): +24 ± 1 VDC @ 1.5 A Max., 2% Regulation, Ripple = 50 mVrms -Measured +24 ± 1 @ 1.16 A

 

10.0 PMI Model No. PEC-40-25-0R518-20-12-SFF-TTLVG, 0.5 to 18.0 GHz Dual Gain Amplifier

 

PMI Model No. PEC-40-25-0R518-20-12-SFF-TTLVG is a Dual Gain Amplifier operating over the frequency range of 0.5 to 18.0 GHz. It has a maximum VSWR of 2.0:1 and an input power of +20 dBm CW. This unit is outfitted with SMA female connectors in a housing that measures 2.54" x 1.00" x 0.383".

  • Frequency Range: 0.5 to 18.0 GHz
  • Gain @ +25°C:
    • Max Gain Position: +38 dB ± 4 dB Max. - Measured +40.1 dB
    • Min Gain Position: +23 dB ± 4 dB Max. - Measured +24.7 dB
  • Pout @ 1 dB Compression @ +25°C:
    • Max Gain Position: +19 dB Min. - Measured +21.1 dBm
    • Min Gain Position: +17 dB Min. - Measured +20.3 dBm
  • Saturated Output Power (Both Gains) Over Operating Temperature: +25 dBm Typ. - Measured +25.8 dBm
  • Noise @ +25°C:
    • Max Gain Position: +5.0 dB Max. (Above 1.0 GHz) - Measured +4.4 dB
    • Min Gain Position: +7.5 dB Max. (Above 1.0 GHz) - Measured +4.5 dB
  • VSWR In/Out: 2.0:1 Max. - Measured 1.51:1/1.92:1
  • Input/Output Impedance: 50 Ohms Nominal
  • Input Power (Without Damage): +20 dBm CW Max. - Measured +20 dBm
  • In-Band Harmonics @ or Below the 1 dB Compression Point: -10 dBc Typ. - Measured -26 dBc
  • Spurious Output Signal @ Any Signal Level up to the Max Input Level: -80 dBc Max. - Measured -87 dBc
  • Pulse Rise Time with Input Signals up to 20 dBm: <5 ns - Measured <5 ns
  • Pulse Overshoot with Input Signals up to 20 dBm: <0.5 dB - Measured 0.5 dB
  • Pulse Droop with the following Pulses up to 250u in Duration Input Signal up to -20 dBm: <2.0 dB -Measured <2.0 dB
  • Pulse Recovery Time with the following Pulses up to 250u in Duration Input Signal up to -20 dBm: 15 ns - Measured 15 ns
  • Gain Switching Time: <500 ns - Measured <500 ns
  • Gain Switch Control:
    • TTL High "1" - Max Gain
    • TTL Low "0" - Min Gain
  • DC Supply:
    • 780 mA Max. @ +12 V ± 5% Max. Gain Position
    • 610 mA Max. @ +12 V ± 5% Min. Gain Position - Measured 424 mA

 

11.0 PMI Model No. P16T-100M52G-100-T-DEC, 0.1 to 52.0 GHz, SP16T Absorptive Switch

 

PMI Model No. P16T-100M52G-100-T-DEC is a Single Pole, Sixteen Throw, Absorptive Switch that operates over the frequency range of 0.1 to 52.0 GHz. It has a maximum input power of 20 dBm and a maximum switching speed of 100 ns. This switch is supplied with 2.4 mm female connectors in a housing measuring 8.00" x 3.00" x 0.67".

  • Frequency Range: 0.1 to 52.0 GHz
  • Insertion Loss:
    • 8.0 dB Typ. (0.1 to 18.0 GHz) - Measured 7.40 dB
    • 12.5 dB Typ. (18.0 to 40.0 GHz) - Measured 13.62 dB
    • 18.0 dB Typ. (40.0 to 52.0 GHz) - Measured 17.22 dB
  • VSWR On (In/Out):
    • 2.5:1 Typ. (0.1 to 18.0 GHz) - Measured 2.70:1
    • 3.0:1 Typ. (18.0 to 40.0 GHz) - Measured 3.20:1
    • 3.5:1 Typ. (40.0 to 52.0 GHz) - Measured 3.62:1
  • VSWR Off (Out):
    • 2.5:1 Typ. (0.1 to 18.0 GHz) - Measured 2.60:1
    • 3.0:1 Typ. (18.0 to 40.0 GHz) - Measured 3.30:1
    • 3.5:1 Typ. (40.0 to 52.0 GHz) - Measured 3.68:1
  • Isolation:
    • 70 dB Typ. (0.1 to 1.0 GHz) - Measured 104.64 dB
    • 90 dB Typ. (1.0 to 18.0 GHz) - Measured 104.64 dB
    • 80 dB Typ. (18.0 to 40.0 GHz) - Measured 75.03 dB
    • 70 dB Typ. (40.0 to 52.0 GHz) - Measured 83.07 dB
  • Input Power: 20 dBm CW Max.
  • Switching Speed: 100 ns Max.
  • Control Signal: TTL Logic - See Logic Table
  • DC Voltage:
    • +5 V @ 1100 mA Max. - Measured 1005 mA
    • -12 V @ 720 mA Max. - Measured 324 mA
 
     
 

DC to 50 GHz Components, Modules, and Sub-Systems

PMI offers just about any RF/Microwave component, module, or sub-system for both industrial and military based requirements.  Please click on the product types below to be directed to our web site catalog.  Components and modules can be modified to meet your exact requirement.

 

 

收缩
  • QQ咨询

  • 如果客服无反应,请刷新页面后再次选择。
  • 业务咨询